Crimping Pliers 卷边钳

Crimping Pliers are revolutionary, low cost hand tools which form a smooth, unobtrusive crimp. Banishes the unsightly sharp edged crimp formed by conventional methods. Perfect for jewelers  # ISC-1418 低成本，光滑的外表，摒弃了传统的难看的锋利刀口，是珠宝理想的手动工具。

Knotting Pliers 打结钳

Stainless steel, box joint construction with cushion grip handles. 5" long overall. Made in Pakistan.  # ISC-1419

不锈钢制造。手柄带垫子。

总长5"

Narrow Nose Pliers 窄嘴钳

The jaws of the Flat Nose plier taper down to a width of only 0.08" (2 mm) at their ends. The jaw tips of the Round Nose are only 0.05" (1.25 mm) in diameter. Both pliers are 5-1/8" (130 mm) long overall and have vinyl grips and leaf springs.刀口顶端为 0.08" (2 mm

Rosary Pliers

These versatile pliers also include a side cutter. Stainless steel construction with cushion grips and coil return spring. 4 3/4" long overall.  # ISC-1420

通用钳。 不锈钢制造。手柄带有垫子。复位卷簧。总长：4 3/4"

Pliers Four-in-One 四合一钳

Also includes an integrated side cutter. Stainless steel construction with cushion grips and leaf springs. 5" long overall.   # ISC-1421

侧面可以切割，不锈钢制造。手柄带垫， 板弹簧。总长5"

Duck Billed 扁嘴钳

The perfect tool for holding flat stock during finishing. Jaws are 1-1/4" long and 5/8" wide at the tips. 6-1/2" long overall with box joint construction.            # ISC-1422

刀口1-1/4"，顶端开口5/8" ，总长6-1/2"

Master Coiler 卷线大师

The Master Coiler allows the user to hold wire with the flat jaw while rotating the round jaw to form the perfect loop or coil. Great for making jump rings. Non-rust highly polished stainless steel construction with comfort grips. The stepped jaw has three diameters for consistent results. Overall length 5-3/4".    # ISC-1423

使用者可以用扁嘴的刀口来把持金属线，旋转另一刀口来形成环和卷状。适用于制造跳转戒指。 阶梯式的构造，3种规格。 总长：5-3/4"

Crimping Pliers

Now you can crimp any medium size bead (2 mm-3 mm) and various shapes, quickly and easily.                 # ISC-1424

可以迅速简单的弯曲任何中等的珠子2 mm-3 mm

Flat Nose Pliers 扁嘴钳

Flat, smooth blades are perfect for wire bending or forming operations. Glare-eliminating black finish, non-slip rubber grips and Light Touch return springs combine to insure operator comfort even during extended periods of use. Fine tips are 1/8" wide (3 mm) at their ends and jaw depth is 27/32" (22 mm). Overall length is 5" (127 mm).   # ISC-1425、

细顶端1/8"（3MM)宽， 刀口深27/32" (22 mm)

Combination Tip Pliers

Glare-eliminating black finish, non-slip rubber grips and Light Touch return springs combine to insure operator comfort even during extended periods of use. Round nose is .75 mm dia. at the tip, and flat nose is 2.9 mm wide. Overall length is 5" (127 mm).   # ISC-1426 复位弹簧，方便操作。圆嘴顶端75 mm ，扁嘴 2.9 mm

Tweezers Nose Pliers

Glare-eliminating black finish. Fine tips are only 1/16" wide (1.5 mm) at their ends and jaw depth is 3/4" (20 mm). Overall length is 5" (127 mm)             # ISC-1427

顶端为1/16"，宽1.5 mm，刀口深3/4" (20 mm)

Bent Nose Pliers 弯嘴钳

Glare-eliminating black finish, non-slip rubber grips and Light Touch return springs combine to insure operator comfort even during extended periods of use. Fine tips are only 5/64" wide (2 mm) at their ends and jaw depth is 3/4" (20 mm). Overall length is 5" (127 mm).             # ISC-1428

顶端为5/64" (2 mm)，刀口深3/4" (20 mm)

Brass Lined Flat Nose Pliers 黄铜扁嘴钳

Jaws are brass lined and smooth to prevent marring of finishes and damage to delicate parts. These are standard size, 4-1/2" overall, 7/8" long jaws. Come with plastic grips and leaf springs.   # ISC-1429

刀口为黄铜，光滑可以防止破坏抛光和精细部分。 标准尺寸，总长4-1/2" ，刀口长 7/8"

Magical Crimpers 卷钳

Transforms tubular crimps into round beads. Available in 2 sizes.   # ISC-1430

可以把 管状弯曲该成圆的珠子。2个尺寸

Flat Nose Pliers 扁嘴钳

Smooth/Narrow Jaws 光滑窄嘴

Smooth surface jaws prevent marring of soft materials Overall Length: 5"Jaw Width: 1/4   # ISC-1431

总长：5"刀口宽：1/4

Flat Nose Pliers 扁嘴钳

Serrated/Wide Jaws 锯齿宽刀口

The wide jaws of this plier are serrated and have a "V" slot running the length of one jaw. The slot makes it easier to grip wire. Overall Length: 5-1/2".Jaw Width: 5/16"           # ISC-1432

锯齿宽刀口， 有个V槽，总长：5-1/2" 刀口：5/16"
 

Chain Nose Pliers 链用钳

Furnished with smooth jaws. Overall Length: 5"                 # ISC-1433

光滑刀口 总长5"

Flat Nose Parallel Pliers
Long Length 扁嘴钳 长长度

The following dimensions are common to both the smooth and serrated jaw models below

以下规格适用于光滑和带有斜纹的刀口。

  Overall Length总长： 5-1/2" (140 mm)

Jaw Width刀口宽 ： 0.310" (7.75 mm)

   Jaw Opening刀口开口： 0.500" (12.5 mm)

# ISC- 1453

Flat Nose Parallel Pliers
Standard Length 扁嘴钳 标准长度

The following dimensions are common to both the smooth and serrated jaw models below.

Overall Length总长: 5" (125 mm)

Jaw Width刀口宽: 0.250" (6.3 mm)

Jaw Opening刀口开口: 0.400" (10.25 mm)

# ISC- 1454

Chain Nose Parallel Pliers 链用钳

The following dimensions refer to the Chain Nose Pliers shown below.

Smooth Jaw 360-366

Overall Length总长: 5" (125 mm)

Jaw Opening刀口开口: 0.400" (10.25 mm)

Serrated Jaw 360-367

Overall Length总长: 5.5" (140 mm)

Jaw Opening刀口开口: 0.500" (12.5 mm)

# ISC- 1455

Flat Nose Pliers
Plastic Jaws 扁嘴钳 塑料刀口

Designed for holding flat objects or for making tight bends in soft wire without damaging the wire. Jaws measure 1" long x 7/16" wide.# ISC- 1456

在不损坏金属线的情况下，可以操作扁平的配件和制作细小弯线

Forming Pliers
Plastic Jaws 成形钳 塑料刀口

Reshape a ring in the plastic V-block of these pliers without scratching the metal. A great tool for jewelry repair.# ISC- 1457

戒指塑型，珠宝修复

Bracelet Bending Pliers 手镯钳 塑料刀口
Plastic Jaws

Shape bracelets in the gently arcing plastic jaws of these pliers.# ISC- 1458

手镯塑型

Bending Pliers
Plastic Jaws 塑料刀口

Bend rings, sizes 6-1/2 and larger, without scratching in the plastic jaws of these pliers 弯戒指，尺寸 6-1/2以上

# ISC- 1459

Ring Holding Pliers
Plastic Jaws 戒指钳 塑料刀口

For holding rings while polishing the inside or for other work. The plastic jaws allow you to hold rings or other circular objects without scratching the metal.# ISC- 1460

用于把握戒指等状物。

Ring Holding Pliers 戒指钳

Made of forged polished steel, with lap joints and large grooved jaws, these pliers are indispensable for holding rings while working on the insides # ISC- 1461

锻钢制造。刀口有槽。用于把握戒指。

Ring Holding Pliers

Jaws are hollowed out and curved to hold rings while filing or polishing. A real time saver for jewelers. Heavy duty construction, 5-1/2".# ISC- 1462

刀口镂空，弯曲，便于操作戒指。省时。

Tube Holding Pliers 管钳

These specially designed pliers will hold your tubing and wire firmly during cutting, filing, and other operations. The nylon jaws feature ten different size grooves for holding a wide variety of round stock without scratching or denting. Replacement jaws are available below. Total length of pliers is 6-1/2" (165 mm).# ISC- 1463

可以牢固的操作管状物和线。 尼龙刀口。10个不同大小的槽。总长： 6-1/2"

Wire Wrapping Pliers 裹线钳

These stainless steel pliers, also known to model train enthusiasts as coupling pliers, enable the user to wrap or loop wire easily. The stepped round jaw has three diameters for making different size loops for jump rings or other operations. The other jaw is concave. Both jaws are finely polished. Overall length 5-3/4".# ISC- 1464

不锈钢制造。3种尺寸，适用不同的戒指 槽一侧凹下。抛光。总长：5-3/4"