Flat Chain Nose 扁嘴链用钳

The 8mm wide dovetail Delrin pad protects the frame surface. The flat metal jaw tapers to a fine point to fit into tight areas. Size 6" Size 5"1/2.   # ISC-1333

刀口一侧为聚甲醛树脂垫，呈燕尾槽形状,，宽8毫米,可以有效保护框架表层。刀口另一侧为扁平金属，成细圆椎形，方便狭小的角落应用。尺寸6" 和 5"1/2.

Flat Round Nose 圆嘴钳

The 8mm wide exclusive dovetail Delrin pad protects the frame surface. The round metal jaw tapers to a fine point to fit into tight spaces. Size 6"-5". # ISC-133

刀口一侧为聚甲醛树脂垫，燕尾槽形状，宽8毫米，可以有效保护框架表层。刀口另一侧为扁平属，成细圆椎形，方便小的角落应用。尺寸6" 和 5"1/2.

Curved Long Nose Chain Plier 弯曲的长嘴链钳

A classic general-purpose plier with curved jaws that taper to a fine point. Ideal for gripping in hard to reach areas Size.6"- 5". # ISC-1335

此钳带有弯曲刀口，为通用钳，顶部为尖，是难以触及的部位的理想用具。尺寸：6"- 5"

Double Delrin Jaw Plier 双聚甲醛树脂爪钳

Superior Delrin pads are only 8mm wide, allowing you to get into restricted spaces.6"- 5". # ISC-1336

高级聚甲醛树脂垫，仅8毫米宽，便于用于狭小部位操作。6"- 5".

Long Nose Chain Plier 长嘴链钳

Flat and smooth inside, rounded outside, these jaws are tapered to a fine point for shaping and bracing. Size 6"- 5". # ISC-1337

内侧扁平且光滑，外部为圆形，刀口顶端为尖，适用于塑性和对相关零配件的支撑。

Nose Pad Adjusting Plier

The secure way to safely and easily adjust all types of nose pads. The cupped jaw for cradling the pad is matched to a slotted jaw for securely bracing the nose pad box and arm. Size 6"Size 5". # ISC-1338

安全有效的调整各式的鼻垫。尺寸：6" 和 5"

End Cutting Plier

This heavy-duty cutting plier has a 24mm long cutting edge. The head tapers to a fine point to cut screws flush in restricted areas. Size 6"-Size 5". # ISC-1339

刀口长24毫米。刀口顶端为尖，可以在狭小部位切断螺丝。尺寸：6" 5"

Side Cutting Plier

The narrow 15mm cutting edge and side cutting action gives easy access to hard to reach screws. Size 6"- Size5". # ISC-1340

15毫米宽的刀口和侧切可以简单的就去除难以够到的螺丝。尺寸：6" 5"

Eyewire Closing Plier 尺寸确定钳

Also known as a "sizing plier", this tool allows you to confirm proper lens size and shape by closing the eye wire without inserting the screw. Size 6" - 5. # ISC-1341

可以在不插入螺丝的情况下，帮你确定和定型眼镜片的大小。尺寸：6" - 5

Eyewire Forming Plier

Delrin pads gently but firmly shape the metal eyewire to conform to the base curve of the lens. Size: 6" - 5". # ISC-1342

聚甲醛树脂，可以按照眼睛片的弯曲程度定型金属框。尺寸：6" - 5".

Finger Piece Plier

Securely grip the front of a plastic frame that has a shield, or grip the hinge or end piece on a metal frame to modify the temple angle for proper pantoscopic tilt. Size: 6"-5". # ISC-1343

Bridge Reducing Plier 鼻梁修复钳

Three jaws engage the bridge from above and below for extreme bridge reduction.用于鼻梁还原修复。

Size: 6" - 5". # ISC-1344

Nose Pad Adjusting Plier 鼻垫调整钳

Nose pad and nose pad arm adjusting tool all in a single plier. Specially designed jaws safely grab and adjust the nose pad and box. Size 6" - 5". # ISC-1345

Screw Flaring Plier 螺丝扩口钳

A quick and easy way to flare the end of a hinge screw to keep it from coming out of the hinge. A sturdy sharp point flares the end of the screw while the hole on the opposite jaw protects the screw head. Size 6" - 5". # ISC-1346

简单快捷的扩口眼镜角的螺丝，以防螺丝掉出。刀口另一侧为洞，可以保护螺丝头。

Wide Jaw Angling Plier 宽刀口角钳

Best bet for adjusting pantoscopic tilt and temple angles on all types of frames. Opens extra-wide to accommodate large temples and hinges.Size 6" - 5". # ISC-1347

开口大，适用于调整宽角镜框太阳穴部位和铰链。尺寸：6" - 5"

Narrow Eyewire and Bridge Forming Plier   

窄镜框和鼻梁定型钳

The classic six base eyewire forming pad has been reconfigured to a narrow 15mm width for today's smaller frames Size 6" - 5". # ISC-1348  

6点定型镜框垫只有15毫米宽，适用于小的镜框。

尺寸6" - 5"

Sizing and Screw Inserting Plier

While holding the eyewire closed you can easily insert and tighten the eyewire screw. Size 6" - 5"

# ISC-1349 可以很容易的安装和上紧螺丝。

Deblocking Plier 解锁钳

Designed with Briot to match the Axcell style magnetic chuck pads. Size 6" - 5". # ISC-1350  

适用于 Axcell风格的磁性卡盘垫。

Deblocking Plier 解锁钳

Remove a Weco, Briot or Nidex style finishing block without scratching the lens.Size 6" - 5"# ISC-1351

在不擦伤眼镜片的情况下，可以轻松的去掉  Weco, Briot 和 Nidex风格的拉细丝机。尺寸：6" - 5"

Nose Pad Popping Plier 眼睛鼻取出钳

Quickest, easiest and most secure way to remove push-in nose pads from the box without distorting the pad arm. Size 6" - 5".# ISC-1352

可以简单迅速安全取出眼睛鼻垫，并且对眼睛鼻处没有任何损坏。

Pad Arm Curving Plier 眼睛鼻弯曲钳

Put the curve back into bent pad arms in one squeeze. The top jaw is concave and the opposing jaw is tapered to fit inside. Pressing the pad arm between the pre-formed jaws quickly creates the proper pad arm curve. Size 6" - 5"   # ISC-1353  

仅仅通过一挤压就可以使弯曲的眼睛鼻恢复到理想的弯度。 尺寸： 6" - 5"

Rimless Post Pulling Plier

Safely disengages the bridge and temple from compression rimless lenses. Prevents lens breakage that results from the attempt to extract the post and tubing by hand. Size - 5".# ISC-1354

用于拆卸没有镜框的眼镜片。防止镜片破损。

Temple Bending Plier 眼镜太阳穴部位弯曲钳

A range of stepped Delrin plastic arcs aid you in easily curving end pieces on temples. Obtain the most comfortable and individualized bend for your patient Size - 5"# ISC-1355

聚甲醛树脂可以有效帮助你弯曲眼镜太阳穴部。尺寸：5"

Tri-Angling Plier

The Tri-Angling Plier is the perfect tool for adjusting the temples without putting pressure on the endpiece. Size - 5"# ISC-1356

三角钳用于调整眼镜的太阳穴部位，而不对眼镜腿施加任何压力。

Fine Combo Chain Nose/Nylon Plier

Delicate end pieces can now be easily adjusted! One jaw is a 5mm nylon-sleeved round dowel that grabs the outside of the end piece. Size - 5"# ISC-1357

用于调整眼镜腿。其中一个爪5毫米，有尼龙外套。