Kingmaster International Trade (Tianjin) Co.,ltd-京登威国际贸易（天津）有限公司


# ISC-1301 To remove suckers and universal blocks with heel diameter 16mm (Essilor - Weco)	# ISC-1302 Three-Point Plier smooth round jaws for pad arm adjustment
根部直径16mm，用来去除吸盘和通常的木板（依视路-Weco）	三点圆滑的夹钳嘴。用于眼睛鼻子的调整。

# ISC-1303 To remove suckers and universal blocks with heel diameter 16mm (Essilor - Weco)	# ISC-1304 Nylon eyewire forming plier 24 mm wide jaws Replacement nylon jaws (2pcs + screws)
根部直径16mm，用来去除吸盘和通常的木板（依视路-Weco）	调整眼镜框.刀口宽24毫米，附带两个可备用的尼龙爪和螺丝。

# ISC-1305 Nylon eyewire forming plier 18 mm wide jaws Replacement nylon jaws (2pcs + screws)	# ISC-1306 Meniscus Plier with nylon jaws for adjusting metal bridges, bending ear pieces and angling temples (12 mm wide jaws) Replacement nylon jaws (2pcs + screws)
眼镜框修复钳刀口宽18毫米。附带两个可备用的尼龙爪和螺丝。	弯月形/凹凸钳，用于调整金属鼻梁，弯眼镜腿和太阳穴部位。刀口宽12毫米。附带连个尼龙爪和螺丝。

# ISC-1307 Lens Axis Plier fixed jaw 32mm and mobile jaw 26mm - repl. jaws 1pr fixed jaw 23mm and mobile jaw 18mm	# ISC-1308 crew Holding Plie
镜片水平轴调整钳固定刀口宽32毫米，可动的刀口宽26毫米。备用固定刀口1个23毫米，可动刀口一个18毫米	螺丝固定钳

# ISC-1309 Temple Angle Adjustment Plier with one rocking nylon jaw Replacement nylon jaw (1pc)	# ISC-1310 Hinge Adjustment Plier

太阳穴调整钳，附带一个尼龙	镜腿调整钳

# ISC-1311 Half Round Long Snipe Nose	# ISC-1312 Flat Nose Plier 5 mm wide jaws
半圆尖嘴剪钳	平嘴钳。5毫米宽的爪

# ISC-1313 Round Nose Plier with fine tapered jaws Stainless steel - 140 mm	# ISC-1314 Wire gripping pliers
圆嘴钳。细椎形爪，不锈钢材质。140毫米	夹线钳

# ISC-1315 Flaring Plier wide jaws Replacement pin (1pc)	# ISC-1316 Flaring Plier with adjustment pin Replacement pin (1pc)
	附带调整拴1件

# ISC-1317 Peening Plier for flattening ends of screws which have been cut off or flared	# ISC-1318 Closure Plier for testing the lens form


# ISC-1319 Pad Adjusting Plier for box joint pads	# ISC-1320 Long Nose Pad Adjusting Plier

	尖嘴眼镜垫调整钳

# ISC-1321 Pad Adjusting Plier with one nylon jaw Replacement nylon jaw (1pc + screw)	# ISC-1322 Pad Adjusting Plier Extra Narrow Jaws
眼镜垫调整钳，附带一个尼龙爪和螺丝	眼镜垫调整钳，附带窄爪

# ISC-1323 Inclination Plier Replacement nylon jaw (1pc)	# ISC-1324 Bent Nose Plier
倾斜钳，附带一个尼龙爪	弯嘴钳

# ISC-1325 Flat Holding Plier with two 11 mm wide nylon jaws, parallel when open Jaws (2pcs + screws)	# ISC-1326 Flat Holding Plier with two 7mm wide nylon jaws Jaws (2pc + screws)
11MM宽的尼龙爪，平嘴钳，爪张开始平行]	7MM宽的尼龙爪，平嘴钳

# ISC-1327 Inclination Plier half round nylon jaw with groove to prevent frame from slipping Replacement nylon jaw (1pc + screw)	A# ISC-1328 inclination Plier for adjustment of pad arms, temples and end pieces. One 7mm nylon jaw, one round metal jaw Replacement nylon jaw (1pc)
有斜度的钳子，带槽半圆的尼龙爪，以防镜框从置换钳中滑脱。	有斜度的钳子，用于调整眼睛鼻，及太阳穴部位和末端部分零件。一个7毫米厚的尼龙爪，一个半圆的金属爪。附带备用尼龙爪一个

# ISC-1329 Marking Plier (without the die) Die. Price changes according to the number of characters or signs. 8 characters (or signs) maximum (1.0 mm high) 价格随数字和符号的数量变化。8个字符或符号。最大1.0毫米高	# ISC-1330 Parallel Jaw Plier with one 7mm wide nylon jaw Replacement nylon jaw (1pc + screw) 平行爪钳，具有一个7毫米宽的尼龙爪。附带一个尼龙爪和螺丝


# ISC-1331 Nylon Cord Compressing Plier 尼龙绳压缩钳


Heavy Side Cutting Pliers with compound action Double Spring # ISC-1332 重侧剪钳，双弹簧，复合作用剪钳

	回页首		UP
2005版权所有京登威国际贸易（天津）有限公司 TEL:86-22-23911572 23911053 FAX:86-22-23924652 EMAIL:kgmaster@public.tpt.tj.cn WEB:http://www.kingmaster.cn