 |
京登威国际贸易(天津)有限公司 |
||||||||||||||||
 |
KingMaster International Trade(Tian Jin) CO.,LTD |
||||||||||||||||
| 其他汽修工具 | 光学钳 | 珠宝钳 | |||||||||||||||
| other tools | Optical Pliers | Jewelry Pliers | |||||||||||||||
NO.KM-2117
|
10-1/2”Replaceable tip circlip pliers set
| 10-1/2”弹簧挡圈钳
|
 |
Feature replaceable tips and have
a spring ratchet locking mechanism to hold circlip securelyagainst tension, offset tips make it easiler to facilitatecirclip. Replacement tips Six pairs of tip at 2.75mm and 3.0mm |
尖端可替换，并有一个弹簧装置来固定弹簧挡圈，
更易安装或取出. 可替换尖端： |
| NO.KM-2125 | 16"Internal-external heavy duty circlip pliers set |
16"弹簧挡圈钳 |
 |
Feature replaceable tips and have |
尖端可替换，并有一个弹簧装置来固定弹簧挡圈， 更易安装或取出. 尖端直径：0.12" (3 mm)， 0 45 90 度角度设计 伸展： 3-1/4" (85 mm) 长度： 16" (400 mm) |
NO.KM-37F
|
3Pcs Flexible pliers set
|
三件可弯曲钳子组
|
3Pcs flexible pliers set 180 degree free. |
三件可弯曲钳子组: 180度内可调节任意角度,应用更广泛. |
|
 |
||
NO.KM-7LPF
|
Flexible combination plier |
可弯曲钢丝钳 |
 |
A flexible combination plier  |
A 可弯曲复合钳子 |
NO.KM-7CPF
|
Flexible cutter plier |
可弯曲斜口钳 |
 |
B flexible cutter plier  |
B 可弯曲切割钳 |
NO.KM-7NPF
|
Flexible neddle nose plier |
可弯曲尖咀钳 |
 |
C flexible neddle nose plier  |
C 可弯曲针孔钳 |
NO.SP-4
|
7" 4PCS SNAPRING PLIER
|
4件彈簧擋圈鉗 |
 |
Snapring pliers |
弹簧挡圈钳 |
External circlip pliers-straight |
外径弹簧挡圈钳－直式 |
|
 |
 |
|
External circlip pliers-bent |
外径弹簧挡圈钳－弯式 |
|
 |
 |
|
Internal circlip pliers-straight |
内径弹簧挡圈钳－直式 |
|
 |
 |
|
Internal circlip pliers-bent |
内径弹簧挡圈钳－弯式 |
|
 |
 |
|
NO.LP-150
|
6" LONG NOSE LOCKING PLIER
|
6" 尖咀大力鉗
|
 |
|
尖嘴设计工作，狭窄区域工作更灵活. 连续使用，无需重新调整. |
NO.LP-200
|
8" SHEAT METAL CLAMP
|
8" 扁咀大力鉗
|
 |
Locks on to work to eliminate hand gripping. Makes bending, forming, and crimping sheet metal easier. Also excellent for upholstery work. |
工作时，可锁定，无需用力握紧. 可用来弯曲，转边钢材物件，也适用于室内装潢. |
NO.LP-225
|
9" LOCKING WELDINE CLAMP
|
9" 燒焊大力鉗
|
 |
Drop forged jaws 1.aligns parts for welding almost instantly 2.holds in locked position with hands removed Leaves hands free for welding Ideal for many welding uses: fenders, steel bars,sheet metal,pipe |
落锤锻造爪 1.刻牢固连接焊接点 2.锁定位置后，手可松开. 适用于：各种挡板，钢棍，铁板，及管状物. |
NO.LP-250
|
10" LOCKING PLIER
|
10" 大力鉗
|
 |
Curved jaw puts tremendous pressure on four points of any style nut or bolt head; includes convenient wire cutter. Turn screw to adjust pressure and fit work, stays adjusted for repetitive use. |
弯曲嘴设计，力度更强大. 重复使用，无需重新调整. |
NO.LP-275
|
11" LOCKING "C" CLAMP
|
11" "C" 型大力鉗
|
 |
Jaws reach around odd shapes to hold material, providing deep reach and access in hard to reach areas.
Wide-opening jaws provide greater versatility in clamping a variety of shapes. Popular in welding and steel framing. |
可夹取圆形，多角或平面的物体，大开口爪设计夹取更稳定，工作空间更大 常使用于焊接或钢铁成型处理 |
| NO.LP-190 | LOCKING CHAIN CLAMP |
链式大力钳 |
 |
With 19"chain |
链长19英寸 |
| NO.KM-8350 NO.KM-8450 |
HEAVY DUTY(CHANIN TYPE)LOCKING CUT PLIER |
链条切管器 |
 |
NO.KM-8350: Capacity:up to dimater 3" NO.KM-8450: Capacity:up to dimater 6 " |
NO.KM-8350:适用范围：最大直径为3" NO.KM-8450:适用范围：最大直径为6" |
| NO.KM-6302 | OFFSET BOOT CLAMP PLIERS |
喉箍钳
|
 |
A special boot clamp crimping plier designed to work in confined space.Use plier parallel to the boot to crimp the clamp.unique offset design allows you to work on clamps on large size boots. Top plate on pliers flattens crimp. work on most all ear-type clamps except those requiring a torque reading. |
弯曲耳式设计能在狭窄空间使用. 适用于大多数耳式夹除了部分需要扭力显示. |
| NO.KM-6303 | C-V JOINT BOOT CLAMP PLIERS |
喉箍钳
|
 |
For ear type clamps. fits late model GM CV joint boots.Also installs perma-quick type clamps quickly and easily . Use for filter,cooling system and vacuum line |
用于耳式夹，适用于新式GM CV，也同样能简单快速安装夹具. 用于过滤器，制冷系统 真空线等. |
| NO.6128 | CLIP REMOVE PLIER |
喉箍钳 |
 |
Design to remove and broken rivets (plastic),use in under care cover or door pannet can adjust the angle from 0-90 degress |
用于拆卸塑料纽扣，使用角度可从0-90度调节. |
| NO.KM-1395 | Valve seal ring pliers |
气门油封钳 |
 |
For removal of valve stem seal and lower valve spring guide |
可用于拆卸汽门油封或降低汽门弹簧. |
KM-306/KM-309 |
Hose Clamp Pliers
|
喉箍钳
|
 |
CR-V Jaw,Cr-Mo handle,Deep-slotted Jaws can remove and replace all size spring wre hose Clamps and lock them safely in any position. 306 180mm |
|
YF-6322 |
C.V.BOOT HOSE CLAMP CUTTER
|
喉箍钳
|
 |
DESIGN EASY TO CUT THE STAINLESS STEEL CLAMP. AVOID TO HARM C.V.BOOT WITH HARDEN EST MATERIAL SKS III USE CAPACITY FOR HOSE CLAMP WIDEH:UNDER 10MM THINCKNESS:UNDER 0.5MM |
|
BC- |
3 In 1 Cutter
|
断线钳
|
 |
BC-14 BC-18 BC-24 BC-36 BC-42 Body of chrome vanadium, hot drop - with heat treated, long lifetime assurance. Three functions in one piece include bolt, wire, cable. Save the space and easy to carry. |
主体硌钒钢，特殊热处理，使用寿命长. 三种功能于一身. 节省空间，方便携带. |
| NO.KM-132 | Automatic wire stripper |
剥线钳 |
 |
Special treatment on the cutter;easy operation. the special device can control the length of wire easily. |
切线刀口经特殊处理，耐用易操作. |
NO.KM-6241
|
FLEXIBLE HOSE CLAMP
|
软轴喉箍钳（水管）
|
 |
For repcacement of fule, oil and water hose. Hose clamp with flexible 630mm wire. Convenient for working hidden areas and long distance. |
用于取出燃油管，水管上的喉箍。 |
NO.PP-400
|
16" WATER PUMP PLIER
|
16" 水管鉗
|
 |
CR-V wide range of jaw adjustment can be used. |
铬钒钢材质 开口可大幅度调整. |
NO.PP-250
|
10" WATER PUMP PLIER
|
10" 水管鉗
|
 |
CR-V wide range of jaw adjustment can be used. |
铬钒钢材质 开口可大幅度调整. |
NO.HLP-200
|
8" H.D. LINESMAN PLIER
|
8" 鋼絲鉗
|
 |
Meet standard cuting & load test Serrated jaw |
满足标准切割测试. 钳口有锯齿. |
Slip Joint Pliers |
鲤鱼钳 |
|
 |
||
NO.HNP-200
|
8" H.D. LONG NOSE PLIER
|
8" 尖咀鉗
|
 |
Meet standard cuting & load test
Serrated jaw |
满足标准切割测试. 钳口有锯齿. |
NO.HDP-175
|
7" H.D. DIAGONAL PLIER
|
7" 斜口鉗
|
 |
Meet standard cuting & load test
|
满足标准切割测试.
|
NO.MNP-125
|
5" MINI NEEDLE NOSE PLIER
|
5" 迷你尖咀鉗
|
 |
Spring loaded Meet standard cuting & load test |
装置有弹簧 满足标准切割测试. |
NO.MDP-110
|
4-1/2" MINI DIAGONAL PLIER
|
4-1/2" 迷你斜口鉗
|
 |
Spring loaded Meet standard cuting & load test |
装置有弹簧 满足标准切割测试. |
2005版权所有 京登威国际贸易（天津）有限公司
TEL:86-22-23911572 23911053 FAX:86-22-23924652 EMAIL:kgmaster@public.tpt.tj.cn WEB:http://www.kingmaster.cn
TEL:86-22-23911572 23911053 FAX:86-22-23924652 EMAIL:kgmaster@public.tpt.tj.cn WEB:http://www.kingmaster.cn